Fixture data — fictional vessels, no real AIS observations

← Back to chart

M/Y Corsario

moored136.5 m · Sanlorenzo 2015confidence mediumdata quality fair

In the last 24 hours, this vessel alone

8.2–9.4tonnes CO₂

That is as much CO₂ as roughly 89 people flying economy from Amsterdam to New York — produced by one yacht in a single day.

No per-guest, per-kilometre rate for this window: the vessel logged no observed distance, so there are no guest-kilometres to divide by.

Estimated — published max capacityPublished maximum guest berths, excluding crew. Not a count of people aboard. Guest figure uses 13 published maximum guest berths. Cruise reference: ICCT (EU MRV-verified reporting). Full detail below and in the methodology.

Identity
IMO9870014
MMSI228780014
BuilderSanlorenzo
Built / refit2015
Hull typesemi-displacement
Length overall136.5 m
Gross tonnage4,530
≥300 GT≥400 GT

GT thresholds are regulatory reference points, not an inclusion criterion of this tracker. Length alone (≥60 m LOA) decides which yachts are followed here.

Capacity (published specification)
Maximum guest berths13
Crew capacity20

Capacity figures come from published specifications. They describe how many people the vessel can accommodate, not how many are aboard.

Estimated market value
Range
Valuation date
Method
Confidencenot published
Technical
Main engines2 × Wärtsilä model on file
Total power14,263 kW
Fuel typeMGO
Cruise / max speed14 / 19 kn
Current status (delayed)
Statemoored
Speed over ground0.0 kn
Position36.27° N, 10.26° E
Observed at2026-08-20 09:32 UTC
Age of position28 min old

Positions are delayed by at least 15 minutes and never presented as realtime.

Last 24h performance
Distance observed0 nm
Time underway0h 00m
Time anchored0h 00m
Time moored23h 24m
Estimated CO₂8.2–9.4 t
Method tierB
Confidencemedium
Fuel burned (source datapoint)
Estimated — vessel specifictier Bfuel scope total onboard
Propulsion0–0 L
Onboard services3,038–3,498 L
Total3,038–3,498 L

Litres are the source datapoint; CO₂ is derived from them, not the other way round. Fuel density 0.840 kg/L (fallback, no vessel-specific value published) × EU MRV factor 3.206. Methodology.

Emissions by operational state
Underway0–0 kg CO₂0.0 h · 0–0 L
Estimated — vessel specifictier B828.3 L/h · speed/load model from installed power
At anchor0–0 kg CO₂0.0 h · 0–0 L
Estimated — vessel specifictier B63.7 L/h · published generator consumption
In port8,892–8,723 kg CO₂23.4 h · 3,302–3,239 L
Estimated — vessel specifictier B45.5 L/h · published in-port hotel load

Each state uses time actually spent in that state × the best available state-specific fuel rate. Anchor and in-port rates are never derived as a percentage of the underway rate; YETI and Heesen fleet splits are used only as sanity checks, never as calculation parameters.

Comparable to roughly 8–9 economy seats, Amsterdam (AMS) → New York (JFK), one way.

6,315 km routed distance (great circle × 1.08 uplift) · 1.00 t CO₂ per seat · published reference factor, not an observation.

The per-guest comparison against cruise-ship intensity is shown once, at the top of this page, using the 13 published maximum guest berths listed under Capacity.

Observed segment
Origin areaCosta Smeralda
Statuswithin EU waters
Distance observed87 nm
Segment coverage71.0%

Only the segment actually observed is shown. Gaps are never interpolated into a continuous voyage.

Coverage & sources
Provider availability98.0%
Target detection rate95.0%
Emissions temporal coverage71.0%

Three separate measurements. They are never merged into a single coverage figure.

  • Observed — AIS position reports relayed by the terrestrial and satellite providers in the snapshot window.
  • Published specification — builder and registry data for length, tonnage, engines and capacity.
  • Estimated — fuel, CO₂ and market value produced by model EMISSIONS_V1_FIXTURE.
Methodology